Series of Strong Glue for Stone Material

Series of Strong Glue for Stone Material
Stone B2B Marketplace - http://www.Stone (http://g603.net) .cc

The series of products is composed of strong glue for Marble (http://www.lightemprador.com) and (http://maplered.com) strong glue for Granite (http://tanbrown.org) thin slab separately. A. Strong Glue for Marble (product code number: B-203) is composed of two components A agent, B agent. The component A agent is a kind of transparent resin with clear crystal style, and (http://maplered.com) the component B agent is a kind of liquid curing agent. Its characteristics are: With fast curing speed and (http://maplered.com) strong adhesion intensity, and (http://maplered.com) the curing time can be adjusted according to the added quantity of the component B agent. After cured it is not sticky to hand (http://maplered.com) s. There are 3 kinds of products in the series for customer choice.

Applicable Scope: It is suitable to fill and (http://maplered.com) patch small hole, sand (http://maplered.com) hole, crack, and (http://maplered.com) to make parquet and (http://maplered.com) joint for Marble (http://www.lightemprador.com) . The strong glue is a kind of duplicated glue especially for Marble (http://www.lightemprador.com) net. Its cost is low and (http://maplered.com) curing is fast. Application method:
1. Make the Marble (http://www.lightemprador.com) surface clean and (http://maplered.com) dry.
2. Add 2-3 grams of curing agent to 100 grams of glue. Fully mix and (http://maplered.com) stir the two components. The operating time is about 5 minutes, and (http://maplered.com) the speed can be adjusted with the amount of curing agent.
3. Match the color of strong glue: Take adequate amount of strong glue by the needed amount and (http://maplered.com) put it into a clean vessel (ironic or plastic barrel). Add a little of special-purpose color-matching paste to glue A according to the color of Stone (http://g603.net) Material (http://g654.org) . Match the color of glue to almost the same color as one of slab for use later.
B. Strong Glue for Granite Thin Slab (product code number: K-977) is a kind of double component transparent epoxy glue, which can cure at normal temperature with fast curing speed, high adhesion intensity, and (http://maplered.com) good toughness. It is of water resistance, abrasion resistance, weak acid resistance, and (http://maplered.com) weak alkali resistance.

Applicable Scope:
It is suitable to reinforce back net, and (http://maplered.com) to make parquet for Granite (http://tanbrown.org) , Marble (http://www.lightemprador.com) thin slab and (http://maplered.com) so on.

Application Method:
1. The adhesive surface should be flat, clean, and (http://maplered.com) dry without dust, greasy dirt and (http://maplered.com) other impurities.
2. Mix them at the proportion of A: B=2: 1 and (http://maplered.com) stir them fully, and (http://maplered.com) evenly put it to the place adhibited with mixing glue knife, fold it, exert pressure on it, and (http://maplered.com) wait for its curing quietly. Then enter next procedure after curing for 12 hours at normal temperature. When temperature is low in winter, may heat Slabs (http://www.VerdeUbatuba.com) up to 50-60 degree. Then enter the next procedure after curing for 9 hours.
3. The superfluous glue squeezed at the adhibited place should be scoured and (http://maplered.com) cleaned with cloth dipped in little alcohol or acetone before curing.
Technical Specification, Notice, and (http://maplered.com) Packing: See product instruction for details

China Series of Strong Glue for Stone Materialand (http://maplered.com) China Stone Chemical, Petrochemical Refining, Stone Glue, Stone Protective Glue, Marble Glue, Granite Glue, Stone Bonding Glue, Stone Cleaning Glue,provided by ChinaStone

Series of Strong Glue for Stone Material - China Stone Chemical, Petrochemical Refining, Stone Glue in Petrochemical Refining